linseed oil

You are currently browsing articles tagged linseed oil.

Mixing oils

11 November 2008 in art materials, art suppliers by David | No comments

Alex writes,

I love the M. Gra­ham water­col­ors, so I am going to start there, but, I won­der: Can I use lin­seed oil with them as a brush cleaner with­out degrad­ing the qual­ity of the wal­nut oil? (Lin­seed is SO much more cost effective.)

Thanks, Alex. I’m not aware of any tech­ni­cal rea­son not to mix lin­seed with M. Gra­ham oil paints (which are ground in wal­nut oil). M. Gra­ham would much pre­fer that you buy oil from them, but inex­pen­sive lin­seed will work just as well and is exactly as nat­ural and non­toxic (don’t buy boiled oil or other hard­ware store lin­seed oil).

In fact, two of my favorite paint mak­ers—Robert Doak & Asso­ciates and Blue Ridge Artist Mate­ri­als—grind their paints in a linseed/walnut blend. You might want to check them out. M. Gra­ham is of mid-range qual­ity while theirs is high-end, but not all that much more expen­sive. All three brands are extremely smooth and brush­able. You could mix paint from all of these brands together with­out any problems.

Tags: , , , ,

How to get oil paint to dry quickly

20 September 2006 in art materials, art technique, oil painting, painting by David | 35 comments

The joy and the curse of oil paint is how long it takes to dry. It’s great to have lots of time to work with the paint, re-do mis­takes, and get those gra­di­ents and edges just right. But then, in multi-layered paint­ing, there are times where you just need to stop and let the paint dry. For days. It can be very dis­rup­tive to artis­tic momentum.

Some painters are fine with let­ting paint­ings dry for days or even weeks. They work on more than one piece at a time and come back to each one when it’s ready. But some­times you want stay with one piece, work­ing every day. Here are some ways to con­trol the rate at which oil paint­ings dry:

  • Paint in thin lay­ers (like the thick­ness of a nor­mal coat of house paint).
  • Avoid slow-drying pig­ments like tita­nium white and ivory black. Use fast-drying pig­ments like lead white and burnt umber.
  • Use paints ground in lin­seed oil. Avoid paints made with slow-drying oils like saf­flower and poppy. Also avoid wal­nut oil, which dries faster than saf­flower or poppy, but slower than linseed.
  • Use a lean lead-containing medium such as Maroger’s (in very small amounts).
  • Add a bit of sol­vent to the first layer. Sprits of tur­pen­tine and oil of spike inter­act chem­i­cally with the paint, caus­ing it to take up oxy­gen more rapidly and dry faster. Min­eral spir­its do not react in any sig­nif­i­cant way, but all sol­vents will make the paint layer thin­ner, which does make paint dry faster. Don’t add so much sol­vent to paint that it becomes washy or watery. Just add a lit­tle bit.
  • Paint on a panel primed with glue-chalk gesso. The first layer will have some oil absorbed by the gesso, so the paint dries more quickly.
  • Add small amounts of metal­lic dri­ers to the paint. I pre­fer lead napthen­ate. I add one tiny drop (from a tooth­pick) per blob of paint on the palette and mix thor­oughly. Exces­sive use of dri­ers will dam­age the paint film, but that much should not be any prob­lem. I gen­er­ally add dri­ers only to slow-drying pigments.
  • Paint on a cop­per panel. The first layer of your paint­ing will dry more quickly.

Some painters also use alkyd medi­ums such as Liquin, Neo-Meglip, and Galkyd. I don’t use alkyd medi­ums and I don’t rec­om­mend them. How­ever, they do make oil paint dry faster.

When I need to, I can get oil paint dry in a day, so I don’t usu­ally have to wait for a layer to dry before I can paint over it. Some­times, I choose to use a medium that makes the paint dry more slowly, or I use a slow-drying pig­ment like tita­nium white. But when I do that, I know that the paint will need extra time to dry. My glaz­ing medium (a 50/50 mix­ture of black oil and Venice tur­pen­tine) is some­what slow-drying, so glazes usu­ally take two or three days to dry.

It’s also the case that I often com­plete one sec­tion of a paint­ing at a time. That way, it doesn’t mat­ter whether yesterday’s paint is dry, because today I’m work­ing on a dif­fer­ent part of the picture.

Updates

Update 22 Feb­ru­ary 2007: In a com­ment on this post, Louis R. Velasquez pointed out to me that some sol­vents do cause oil paints to dry more quickly via chem­i­cal action. I have cor­rected the infor­ma­tion in this post. I am grate­ful to Louis for point­ing out my error.

Update 19 Feb­ru­ary 2008: Added paint­ing on cop­per pan­els as another way to make oil paint dry more quickly.

Related post

Tags: , , , , , , , ,